Maxwell model
英 [ˈmækswəl ˈmɒdl]
美 [ˈmækˌswɛl ˈmɑːdl]
麦克斯韦模型
双语例句
- Introducing the generalized Maxwell model and corresponding the relax time spectrum lead to the calculating relation of the tire rolling coefficient and relax time spectrum, and the influence of velocity on coefficient of rolling friction is discussed.
通过广义的Maxwell模型，研究其松弛时间谱与滚动摩阻的关系，得出了轮胎滚阻系数与松弛时间谱的计算关系并讨论了滚轮前进速度对滚动摩阻系数的影响。 - The result came from Maxwell model is agreeable to the experimental result.
用Maxwel模型对实验结果进行了解释。 - A method of establishing generalized Maxwell model for viscoelastic material
关于黏弹性材料的广义Maxwell模型 - Maxwell model is adopted to conduct the relationship of plastic between strain and time in the process of microchannel formation. Compared to experimental curve, the same trend is gained.
采用Maxwell模型推导了塑料在微通道成形中的应变和时间关系，与实验中得到的应变时间曲线比较后，趋势基本一致。 - Coupling damage factor into the MAXWELL model, a viscoelastic model with damage is established.
将连续性损伤因子与Maxwell粘弹性模型耦合推导得到考虑损伤的粘弹性模型。 - It is discussed that Maxwell model can be used to describe stress relaxation tests and dynamic mechanical tests, and the molecular theory may also be used to calculate the relaxation time of polymer solutions.
Maxwell模型可以很好地描述应力松弛实验和动态力学实验，也可以用分子理论对聚合物溶液的松弛时间进行计算。 - Considers a non-local initial-boundary value problem for the one-dimensional quasi-linear wave equation originated from the mechanism so called Maxwell model.
考虑来自机械振动中称为Maxwell模型的一维拟线性波动方程的一类非局部初边值问题。 - Simulation on stress relation experiment verifies generalized Maxwell model is appropriate to describe the mechanical behaviors of wafer.
在对直接压缩后的应力松弛试验进行仿真时，仿真曲线与试验数据吻合较好，说明采用粘弹性力学模型描述草片的力学行为是合理的。 - Venant plastic substance. The elastic component and the non-linear viscous component of the improved Maxwell model can simulate the instantaneous elastic deformation and visco-plastic deformation respectively. The Kelvin model and St.
在五元件黏弹塑性模型中，改进Maxwell体中的弹性体和非线性黏性体分别模拟瞬时弹性变形和黏性流动变形，Kelvin体和St。 - Based on thermal rheological theory and time-temperature equivalent principle, the generalized Maxwell model was used to simulate viscoelastic characteristic of fused optical fiber glass. The thermal viscoelastic model of fiber coupler in the process of fused biconical taper was set up.
根据热粘弹流变理论和时温等效原理，以广义Maxwell模型模拟高温下熔融光纤玻璃的粘弹特性，建立了光纤耦合器熔融拉锥过程热粘弹数值分析模型； - Understanding the Nature of Viscoelasticity of Polymer based on Relaxation Time Defined from Maxwell Model
从Maxwell串联模型定义的弛豫时间τ理解聚合物粘弹性的本质 - Have introduced Maxwell model and Kelvin model in the classical model of viscoplasticity theory.
介绍了粘弹性理论经典模型Maxwell模型和Kelvin模型。 - In addition, this model can be simplified to the conventional Fick's Model, Extended Stefan-Maxwell Model or Dusty-Gas Model.
此外，该模型可根据实际情况依次简化为常规意义上的尘气模型、广义Stefan-Maxwell模型和费克扩散模型。 - The salt formation is regarded as Maxwell model, and a viscous elastic mechanical model for plane strain features is established.
将盐层作为马克斯威尔体，建立了平面应变问题的粘弹性体力学模型。 - With Laplace transformation, the solution for longitudinal vibration of a pile with variable cross-section is derived when surrounding soil is simulated respectively with normal Voigt model and normal Maxwell model.
采用拉氏变换法分别得到了标准Voigt模型和标准Maxwell模型条件下成层土中任意段变截面桩纵向振动解。 - Linear aging viscoelastic constitutive model is used to calculate restrained stress based on the general Maxwell model.
研究混凝土早期约束收缩线粘弹性计算模型，建立了基于广义Maxwell模型的线粘弹性本构关系，利用该模型可以预测混凝土早期约束应力的发展。 - The three elements Maxwell model was established to describe stress relaxation phenomena of apple.
建立了描述苹果应力松弛现象的三元件Maxwel模型。 - As the viscous damper, its inherent stiffness and supporter were represented as a three-element Maxwell model, the equations of motion of the cable and the three-element Maxwell damper system were obtained.
采用三单元Maxwell阻尼器模型模拟粘滞阻尼器、阻尼器内刚度和支架，得到拉索-三单元Maxwell阻尼器系统的运动方程。 - The Burgers theoretical model by Kelvin model and Maxwell model is established by analyzing the features of the curve and its parameters are obtained.
并分析了曲线的特点，建立了由Kelvin模型和Maxwell模型串联组成的Burgers大理岩蠕变理论模型，求出了相应的蠕变参数。 - The stress relaxation modulus of PTFE ( polytetrafluorethylene) was studied by using fractional Maxwell model.
用分数Maxwell模型对聚合物PTFE（Polytetrafluoethylene）的应力松弛过程进行了研究。 - The natural transverse vibrations of rectangular thick plates with viscoelasticity of Maxwell model
Maxwell模型粘弹性矩形厚板固有横向振动 - First, using Maxwell model to express the viscoelastic of plastic gear, because all of formulas and parameters about viscoelastic are set through Maxwell model in ANSYS software.
首先，采用Maxwell模型作为表征塑料粘弹特性的模型，ANSYS软件中对粘弹性模型的相关公式和参数都是针对Maxwell而设定的。 - The dynamic behavior and stability of simply supported viscoelastic pipes conveying fluid with Maxwell model are analyzed.
对简支Maxwell模型粘弹性输流管道探讨了其动力特性和稳定性问题。 - This paper is a follow-up of paper [ 1], in which approximate integral method is used to give a numerical solution of two dimensional problems ( the Maxwell model).
文献[1]对粘土固结与次时间效应问题的解仅考虑Maxwell模型（视长期沉降增率为常数），用近似积分法得到二维问题的数值解。 - Relaxation Modulus of PTFE Studied by Fractional Maxwell Model
分数Maxwell模型应用于PTFE松弛模量的研究 - The lamellar liquid crystal shows gel-like behavior, the hexagonal liquid crystal shows Maxwell model.
层状液晶显示gel-like流变性质，六角状液晶显示Maxwell模型。 - Considered the special properties, the linear viscoelastic model of Maxwell Model was used to describe non-newtonian fluid properities of blood in macrocosmic and microcosmic viscoelastic of blood cell.
在血液流变学的基础上，探讨血液的各理化指标，结合血液的特殊流变性，利用线性粘弹性模型&Maxwell流变模型来描述血液的宏观的非牛顿流体特征和血细胞的微观粘弹性特征。 - In demolding process, Maxwell model is employed to describe the mechanical properties of polymer when the temperature near the glass transition temperature.
在脱模过程中，聚合物温度位于玻璃转化温度附近时，采用Maxwell模型表示聚合物的机械性能。 - Based on the theory of viscoelastic and the Maxwell model, the model on the micro-tensile when ultra-thin fiber is melt is established.
基于粘弹性理论和麦克斯韦模型，建立超细径光纤熔融加热过程中微张力的理论模型。 - One is distributed parameter Maxwell model and the other is distributed order standard linear solid model.
第一类是分布参数麦克斯韦模型，第二类是分布阶标准线性固体模型。